Description
Feed rollers mounted on both sides. Attachment to the rear three-point of your tractor, drive via tractor PTO shaft with 540 rpm. Suitable for tractors from 30 hp.
To drive the hydraulic feed rollers, you need a double-acting hydraulic connection on the tractor or a single-acting and pressureless return.
The speed of the feed rollers can be regulated via a control valve. The return is very helpful for blockages, so that working with the device is easy and safe. The size of the chopped material is easily changed via the speed of the feed rollers, which is a great advantage, especially for further processing in heating systems etc.
There are 4 solid rotating knives ground on both sides installed in the knife disc. A shearbar is mounted on the body. The chopped wood is conveyed through an ejection channel.
This can be rotated 360° and the ejection angle is also adjustable. The shredded material can thus be ejected up to 10m.
The filling funnel is foldable for transport. Two shock absorbers make it easy to open and close the hopper.
By simply opening the ejection channel to the side, you can easily access the blade disc. This means that the shredder can be cleaned and maintained very easily.
The hopper has an opening of 63 x 63cm and an opening of 16 x 30cm at the bottom towards the knives. Thus wood can be chopped up to 16cm. The knife disc with the 4 knives has a diameter of 76 cm and a weight of 95 kg.
The maximum height of the device is approx. 220cm. This means that the shredded material can be easily ejected onto a trailer.
The devices are delivered completely assembled, gearbox filled with oil, bearings are greased!