Description

Absolute professional device from the house of Del Morino in Italy, which produce agricultural equipment in-house since 1875 and is one of the most renowned suppliers on the market.
The base frame is a 1A-quality steel frame, resistant and of excellent material thickness, laser-cut at the factory, automatically bent and welded with robots. So the workmanship is perfect and every weld and sheet metal edge top executed.
The drive takes place via the rear PTO of your tractor with 540 rpm. Power transmission to the cutting disc by means of 2er V-belts (cross-section B) with tension spring, so that the correct belt tension is permanently applied and, on the other hand, no damage to the drive machinery (tractor, gear, etc.) can occur during blockage of the cutting unit.
Large belt pulley with a diameter of 500 mm, cutting disk made of high-performance steel with ventilation, ball bearings in cast iron brackets, 4 reversible / exchangeable hammers and an easily exchangeable steel knife as a counter-blade, all fully electronically balanced for smooth and vibration-free running of the cutting unit. The chopper is suitable for branches and trunks up to a diameter of 120 mm.
Automatic feeder with hydraulically operated feed roller and no-stress function: The shredder automatically pulls in only as much wood as it can deliver. When overloaded, the feed rollers stop and start again after the material has been processed.
Large hydraulic oil tank (9 liter volume) in the base of the forage harvester. Own hydraulic pump and directional valve to drive the feeder. Note: Without its own oil tank and its own hydraulic pump, it may happen that the volume of hydraulic oil in the tractor for a continuous operation is not sufficient. Especially for smaller tractors with low pump capacity and oil quantity, the oil gets so hot within one hour of continuous operation that this can have devastating consequences for the tractor and machine ....Therefore, rather more expensive, but complete and safe buy !!
Safety switch in the form of a bracket on the intake funnel. Position 1 / bracket all the way to the machine = retract, position 2 / bracket in the center = reverse movement of the retraction roller to eject, position 3 / bracket fully pulled towards the body = emergency stop
Large discharge chimney, delivery height approx. 2000 mm, discharge plate for specifying the discharge direction, chimney can be rotated by 360 degrees. Weight of the machine approx. 380 kg (without oil filling). Delivery is inclusive. Propeller shaft.