Description

Sickle mulcher, mulcher, mower model DMK 150 / 3

Very robust sickle mulcher in 1.500 mm working width from the house of Del Morino in Italy, which produce high-quality attachments in own production since 1852.

It is particularly important to note with DMK devices that 3 free-swinging knives (look at other offers where often only 2 knives are used) with a material thickness of ... .. are installed. The material of the knife is also specially hardened so that you will enjoy this device for a long time. Knives can of course be exchanged individually and can be obtained from us or from local specialist shops at any time.

Thanks to the three knives and the sharp, fire-hardened knife edges, a very clean horizontal cut is possible. Due to the material thickness and the associated impact and robustness of the knives, even coarser branches can be driven over or molehills can be straightened.

The clippings are cut with a high propeller speed and the three swinging knives nicely small (mulched) and blown in the back of the device in a wide area. The mulch can then remain on the meadow and serves as fertilizer.

Movable three-point hitch for Cat. I or II attachment to the rear - three-point. This means that it is also possible to move “off-center” (cut edges can be approached better). Cast gear with direct drive on the knife rotor. Driven by the PTO shaft of your tractor with 540 rpm. PTO shaft with shear pin is included!

Height adjustment by lateral runners. Cutting height from 3 to approx. 10 cm. Skids can be turned and are thus usable on both sides.

Ejection protection to the front towards the tractor by chains, movable ejection flap to the rear.