Description

Sickle mulcher, mulcher, mower model DMK 120

Very robust sickle mulcher in 1.200 mm working width from the house of Del Morino in Italy, which produce high-quality attachments in own production since 1852.

It is particularly important to note that the DMK 120 has 2 free-swinging blades. The material of the knife is also specially hardened so that you will enjoy this device for a long time. Knives can of course be exchanged individually and can be obtained from us or from local specialist shops at any time.

Thanks to the two knives and the sharp, fire-hardened knife edges, a very clean horizontal cut is possible. Due to the material thickness and the associated impact and robustness of the knives, even coarser branches can be driven over or molehills straightened.

The clippings are cut with a high propeller speed and the three swinging knives nicely small (mulched) and blown in the back of the device in a wide area. The mulch can then remain on the meadow and serves as fertilizer.

Movable three-point hitch for Cat. I or II attachment to the rear - three-point. This means that it is also possible to move “off-center” (cut edges can be approached better). Cast gear with direct drive on the knife rotor. Driven by the PTO shaft of your tractor with 540 rpm. PTO shaft with shear pin is included!

Height adjustment by lateral runners. Cutting height from 3 to approx. 10 cm. Skids can be turned and are thus usable on both sides.

Ejection protection to the front towards the tractor by chains, movable ejection flap to the rear

Further, available models of the sickle mulcher:

DMK135: 1,35m desktop

DMK150: 1,50m desktop

DMK180: 1,80m desktop