Spare parts inquiries and orders please send by email | verkauf@landmaschinen-neuhaus.de
Agricultural machinery Neuhaus
Agricultural machinery Neuhaus

✓ fast shipping ✓ personal advice ✓ purchase on account

Customers who are thinking about purchasing a flail mulcher for the first time are confronted with this question in particular. The market is full of a wide variety of devices and types ... and how can I then say which knives or mallets are suitable for my needs?

That's why I've put together some information on the most common knife shapes and written down my personal opinion.

Let's start with the Y knives:

Y-knife

Y-blades are a somewhat lighter blade shape that is often used in cheaper mulchers. Of course, there are also high-quality Y-blades with corresponding material thickness and weight, which are necessary for special applications... but more on that later. These blades are generally made of 2 - 3 mm steel, with sharpened edges on both sides. The advantage of these blades is that the angled cutting edges make it possible to mulch the clippings somewhat smaller. The lower weight of the blades ensures that even smaller tractors with less power can manage somewhat larger working widths. Unfortunately, for the manufacturer this often means that due to the lack of impact power (the more weight, the greater the impact power), they can save on the material of the mulcher. You can see this if you take a closer look at the holders for the flails on the shaft, which may seem somewhat "thin" to you on closer inspection. The body of the mulcher is also often made of thinner material, as the forces generated by, for example, a heavy 800-gram hammer flail are simply not effective. The cutting pattern of the Y-blades is jagged and uneven (due to the angled cutting edges). Due to the lower weight of the blades and the resulting lack of impact power, they often fail to break up nettles or similar plants.

An alternative (...or not) are the “fine-cut cup knives”.

cups Knives

These blades are made of sheet metal and at first glance resemble hammer flails. But at second glance (or when you look at the back of the flails), you'll realize they're sheet metal blades, lightweight and with little impact. One advantage is the straight cutting edge, which runs horizontally to the ground, creating a "lawnmower"-like cut on the first and second use. Unfortunately, the sheet metal material makes this type of blade very sensitive to stones and extremely prone to wear. The low weight of the blades results in the same disadvantages as the Y-blade: too light, with little impact.

My personal recommendation is therefore quite clear to hammer mallet, which are available in different weight classes and in many forms on the market.

hammers

As a rule, it is a cast mallet, whereby the material composition often varies from manufacturer to manufacturer. On the one hand, the flails should be more and more resistant to stones, and on the other hand, thanks to the straight cut edge, they should of course cut a clean lawn. A material that is too hard can be sanded wonderfully, but threatens to tear if it hits an obstacle. Material that is too soft quickly loses its grind and is susceptible to more or less large indentations caused by stones etc. Each manufacturer also has a different philosophy when it comes to the weight class of the mallets used and the associated impact. 

For example, with our own brand, Evotech, we rely on 800g hammer flails. Just like Talex or the German manufacturer Fehrenbach, they generally succeed in not only producing a beautiful lawn cut (...not a perfect "lawnmower cut," but still looking good, straight, and neat), but also shredding stray branches up to 3-4 cm in diameter, leveling molehills...even using them in reeds is no problem, as the photo below demonstrates.

Mulcher in action

The flails are easy to resharpen and have sufficient material for long-term use. Due to the weight of the flails, the mounts on the flail shaft are almost as thick as a thumb, and the body of the mulcher is also made of heavy-gauge sheet steel. On our Evotech models, for example, the side panels are made of 10 mm sheet steel. 

The Italian manufacturer Deleks uses a lower flail weight for its “Lince” flail mowers, but allows the flail shaft to run at higher speeds in order to achieve the impact power of the 800 g flail.

In a slope mulcher with a swiveling head or a special forestry mulcher, hammer grinders with 1200 gr. Weight are usually used, which are then able to shred wood up to 8 cm branch thickness. Of course, the mounts of the knives and the whole body are designed accordingly.

So you see, I personally would always advise you to mulcher with mallets. Pay attention to the material strength of the mulcher, look at the holders of the flail and ask for the individual prices of the flails, which can vary considerably depending on the manufacturer. Take a look, too the flail offer in our online shop

There are also many other knife variations, such as the Y-knife with a central mulching blade. I never wanted to offer this type of knife in my company, but because of this, the well-known German companies offer this particularly in their mulchers with drip tray, but now we have them in the program. Here is a picture of it.

Aerator mulching blades

Personally, I think that due to the distance between the blades (which is greater than, for example, with a pure scarifier) ​​and especially due to the V-belt drive of the flail mower, this is not a suitable blade shape for a mulching device, because the constant scratching through the ground by the central blade causes the V-belts of the drive to "slip through", which is evident in the abnormal V-belt wear.

If you have any questions or suggestions about the knife types, feel free to contact my sales team of Landmaschinen Neuhaus or just send me an E-Mail sales@landmaschinen-neuhaus.de

 

 

 

 

 

Order ATVs / QUADs online now at TOP prices

On QUADFARM.de you will find our current range of ATVs, QUADs and UTVs - whether new or used vehicles and at very favorable conditions. We carry various brands such as Yamaha, KYMCO, Stels and others.