Description
Working width of the rotary harrow is 1.700 mm
The harrow model MG from the house GEO is especially for smaller farms as the processing of vegetables and. Orchards, in wine growing etc. best for.
The rotary harrow is attached to the rear three - point of your tractor (tractor - three - point cat I and II) where the shots for the lower links at a distance from each other are set variably on the device. So you are very flexible.
The harrow is driven by the PTO shaft of the tractor with a speed of 540 rpm. The power is transmitted directly to the gear rims / rotors, each with 2 blades, by means of a large reduction gear. The rotors run at 260 rpm and so result in a very nice, fine-crumbly soil appearance. Knives can be exchanged individually, sprockets can be individually lubricated easily accessible from above (see photos).
The attached grid roller as a follower not only optimizes the soil appearance, but also serves to adjust the working depth. The height of the roller can be easily regulated and adapted to the conditions using the perforated plate brackets on the side and the bolt lock.
The devices are delivered completely assembled, gearbox filled with oil, bearings are greased!
Why you should buy GEO products at agricultural machinery Neuhaus:
- We have had this brand for more than 10 years in the program and appropriate experience with the devices
- All devices are completely assembled by us and if a gearbox is available, this is of course filled with the specified by GEO gear oil
- We have our own workshop with the corresponding techn. Know-how and service
- Consumption u. Spare parts can be bought easily with a few clicks in the onlineshop
- In case of service we do not leave you out in the rain and are always available for you
- Have a look at our guide, where we have a lot of useful tips on GEO products for you